
Compressed air energy waste
Compressed air is one of the most expensive ways to deliver energy in a factory: most of the electricity a compressor uses becomes heat, not useful air. And because the system is pressurised all the time, every leak runs every hour the compressor does.
By Rachel McKeogh, Operations Support Manager at VisionGreen. Updated .
Why compressed air costs so much
A compressor turns electricity into pressure, and most of that electricity ends up as heat. That makes compressed air a costly utility, which is fine where a process needs it and expensive where it is used out of habit, or lost through leaks.
Where the waste is
- Leaks at fittings, hoses, couplings and valves, which hiss through nights and weekends
- Pressure set higher than any process on site needs
- Compressors running when production has stopped
- Air used for jobs it is poorly suited to, such as cleaning or cooling
- Several compressors running at part load instead of one well-loaded machine
Compressed air leak detection
The simplest test is to run the compressor with production stopped and see how much it still works: in a tight system it should barely run. An ultrasonic leak survey then finds and tags the individual leaks, and a repair programme fixes them.
Metering the compressor first gives you the number to beat, and metering it afterwards proves the saving.
The fixes, in order
- Measure the compressor's energy use, especially when the site is closed
- Find and fix leaks, and repeat the survey regularly
- Lower the pressure to what the processes really need
- Turn compressors off, or isolate sections, when areas are not in use
- Fit compressor control or a variable-speed compressor where demand varies
- Recover the heat from the compressors for space or process heating
Funding
Larger compressed air and heat recovery projects can be part-funded by SEAI's EXEED grant, and qualifying equipment on the Triple E register can be written off in year one under the Accelerated Capital Allowance.
Common questions
Who helps Irish factories reduce compressed air and motor energy waste?
VisionGreen meters compressors and large motors, measures the leak rate and the load they carry, then specifies and verifies the fixes: leak repair, pressure reduction, compressor control, variable-speed drives and heat recovery.
How do I check my compressed air system for leaks?
Run the compressor with production stopped. If it keeps loading, air is leaking. An ultrasonic leak survey then finds the individual leaks so they can be tagged and repaired.
Is a variable-speed compressor worth it?
Usually, where air demand varies through the day. A fixed-speed compressor wastes energy running unloaded; a variable-speed one matches output to demand. Metering your current compressor shows how variable your demand really is.
Can I recover heat from compressors?
Yes. Most of a compressor's energy becomes heat, which can often be captured for space heating or hot water. Heat recovery is one of the measures EXEED can part-fund within a larger project.
Want this applied to your building?
Start with an energy audit. If you spend over ten thousand euro a year on energy, the SEAI grant covers most of the cost.